SolidMotor Plots Class#

class rocketpy.plots.solid_motor_plots._SolidMotorPlots[source]#

Class that holds plot methods for SolidMotor class.

Variables:

_SolidMotorPlots.solid_motor (SolidMotor) – SolidMotor object that will be used for the plots.

__init__(solid_motor)[source]#

Initializes _MotorClass class.

Parameters:

solid_motor (SolidMotor) – Instance of the SolidMotor class

Return type:

None

thrust(lower_limit=None, upper_limit=None)[source]#

Plots thrust of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

total_mass(lower_limit=None, upper_limit=None)[source]#

Plots total_mass of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

mass_flow_rate(lower_limit=None, upper_limit=None)[source]#

Plots mass_flow_rate of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

exhaust_velocity(lower_limit=None, upper_limit=None)[source]#

Plots exhaust_velocity of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

grain_inner_radius(lower_limit=None, upper_limit=None)[source]#

Plots grain_inner_radius of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

grain_height(lower_limit=None, upper_limit=None)[source]#

Plots grain_height of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

burn_rate(lower_limit=None, upper_limit=None)[source]#

Plots burn_rate of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

burn_area(lower_limit=None, upper_limit=None)[source]#

Plots burn_area of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

Kn(lower_limit=None, upper_limit=None)[source]#

Plots Kn of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

center_of_mass(lower_limit=None, upper_limit=None)[source]#

Plots center_of_mass of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_11(lower_limit=None, upper_limit=None)[source]#

Plots I_11 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_22(lower_limit=None, upper_limit=None)[source]#

Plots I_22 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_33(lower_limit=None, upper_limit=None)[source]#

Plots I_33 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_12(lower_limit=None, upper_limit=None)[source]#

Plots I_12 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_13(lower_limit=None, upper_limit=None)[source]#

Plots I_13 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is none, which means that the plot limits will be automatically calculated.

Return type:

None

I_23(lower_limit=None, upper_limit=None)[source]#

Plots I_23 of the solid_motor as a function of time.

Parameters:

  • lower_limit (float) – Lower limit of the plot. Default is None, which means that the plot limits will be automatically calculated.

  • upper_limit (float) – Upper limit of the plot. Default is None, which means that the plot limits will be automatically calculated.

Return type:

None

all()[source]#

Prints out all graphs available about the SolidMotor. It simply calls all the other plotter methods in this class.

Return type:

None